The dual-shaft mixer is also known as a wet and dry mixer. The materials in the machine are subjected to compound motion by two rotors in opposite directions. The paddles with animal material rotate counterclockwise along the inner wall of the machine slot, and the animal material is turned left and right. A weightless area is formed at the intersection of the two rotors. In this area, regardless of the shape, size and density of the material, the material can be floated in an instant weightl...
Used for filtering and removing impurities from liquids. Working principle: After the untreated suspension is sent to the filter cartridge, solid phase particles larger than the outer diameter of the small hole on the filter cartridge are retained by the filter cartridge and sent to the bottom of the filter by a rotating brush. The filtered liquid is sent out from the liquid discharge pipe, and the filtered impurities can be discharged with the liquid flow through the impurity overflow valve ...
The LS type screw conveyor is a new type of conveying device for continuously conveying powder and granular objects in a closed circular cross-section housing by means of a rotating spiral. The head and tail bearings are moved to the outside of the casing. The sling bearing adopts sliding bearing and is equipped with dust-proof sealing device. The whole machine has high reliability, long service life, strong adaptability, convenient installation and maintenance, and flexible arrangement of in...
DLTS series single screw hydro-extractor is equipment adopted mechanical direct pressure method to dehydrate wet material.The dehydrated material can directly enter into the next procedure of drying equipment; it greatly reduces the energy consumption of drying.This machine absorbs the characteristics of similar foreign products, has the characteristics of simple structure, unique design, convenient operation and maintenance. Process performance reaches the advanced level of similar foreign p...
DLTS series single screw hydro-extractor is equipment adopted mechanical direct pressure method to dehydrate wet material.The dehydrated material can directly enter into the next procedure of drying equipment; it greatly reduces the energy consumption of drying.This machine absorbs the characteristics of similar foreign products, has the characteristics of simple structure, unique design, convenient operation and maintenance. Process performance reaches the advanced level of similar foreign p...
In the corn starch processing technology, after the light liquid (dilute protein) of the separator is pressed by a plate and frame filter press, the protein powder produced is large in size, about 50% water, and has a certain viscosity. Before entering the tube bundle dryer, it is necessary to perform the crushing. The traditional crusher is used for crushing, and the effect is not ideal. The new wet protein crusher independently developed by our company has completely solved this problem tha...
This device is made of motor, reduction gears, draught fan, drying tube and shell body.
Working principle
Steam heat drying tube at first, material get into shell body, drying tube rotated by motor, meanwhile, stir fry and push materials, the wet steam will be discharged to outdoor by draught fan.
Equipment characteristic
1. Advantages: low steam consumption, low electricity consumption, wide range of drying material, large output, large water evaporation, high moisture material which can d...
DLTS series single screw hydro-extractor is equipment adopted mechanical direct pressure method to dehydrate wet material.The dehydrated material can directly enter into the next procedure of drying equipment; it greatly reduces the energy consumption of drying.This machine absorbs the characteristics of similar foreign products, has the characteristics of simple structure, unique design, convenient operation and maintenance. Process performance reaches the advanced level of similar foreign p...
The air dryer uses high-speed hot air to suspend the mud-like, powdery and granular materials in the air. Large heat transfer surface area, high heat transfer coefficient, short drying time (most materials only need a few seconds to dry), suitable for drying heat-sensitive materials. This equipment is widely used in the drying of powdery and granular materials in food, chemical, pharmaceutical, building materials and other industries. The products that have been used in this series of dryers ...
The positive pressure filter is a filter placed in a closed pressurized warehouse. A scraper conveyor is arranged under the falling slot of the disc filter, and a discharge device is installed at the head. The filtered suspension is fed into the tank of the filter by the feed pump, and the pressurized chamber is filled with a certain pressure of compressed air. On the filter disc, a pressure difference is formed between the filter valve and the air-water separator through the atmosphere. Unde...
This device is made of motor, reduction gears, draught fan, drying tube and shell body.
Working principle
Steam heat drying tube at first, material get into shell body, drying tube rotated by motor, meanwhile, stir fry and push materials, the wet steam will be discharged to outdoor by draught fan.
Equipment characteristic
1. Advantages: low steam consumption, low electricity consumption, wide range of drying material, large output, large water evaporation, high moisture material which can d...
Main feature
◎ Manufactured using international quality standards.
◎ Advanced lubrication system: low power, low energy consumption, small fuel consumption, low use cost.
◎ Water-cooled device improves the operating temperature of the bearing and increases the service life.
◎ Supported by a certain flexible bearing seat, the equipment has less vibration and more stable operation.
◎ Adopt 5V united belt automatic tensioning device, high transmission efficiency, stable and reliable operation, l...