DLTS series single screw hydro-extractor is equipment adopted mechanical direct pressure method to dehydrate wet material.The dehydrated material can directly enter into the next procedure of drying equipment; it greatly reduces the energy consumption of drying.This machine absorbs the characteristics of similar foreign products, has the characteristics of simple structure, unique design, convenient operation and maintenance. Process performance reaches the advanced level of similar foreign p...
Technical parameters
Type
Separation cylinder diameter(mm)
Production capacity commodity corn(t/d)
Feed pressure(Mpa)
Recoil pressure(Mpa)
Dimensions(mm)
SPX-360
360
150
0.1
0.1
580×430×1520
SPX-450
450
300
0.2
0.2
1129×970×2538
SPX-750
750
500
0.25
0.25
1200×900×2730
SPX-1000
1000
1600
0.35
0.35
1500×1150×3420
Anyone who pumps liquid for any purpose (irrigation, industrial, or private and public water systems) knows their greatest enemy is sand, silt, grit or other s...
DLTS series single screw hydro-extractor is equipment adopted mechanical direct pressure method to dehydrate wet material.The dehydrated material can directly enter into the next procedure of drying equipment; it greatly reduces the energy consumption of drying.This machine absorbs the characteristics of similar foreign products, has the characteristics of simple structure, unique design, convenient operation and maintenance. Process performance reaches the advanced level of similar foreign p...
The dual-shaft mixer is also known as a wet and dry mixer. The materials in the machine are subjected to compound motion by two rotors in opposite directions. The paddles with animal material rotate counterclockwise along the inner wall of the machine slot, and the animal material is turned left and right. A weightless area is formed at the intersection of the two rotors. In this area, regardless of the shape, size and density of the material, the material can be floated in an instant weightl...
The multi effect falling film evaporator uses the falling film evaporation principle to heat and boil the dilute solution to vaporize part of the water to achieve the purpose of concentrating the solution. This unit adopts continuous production process, which has the advantages of large concentration ratio (1 / 5-1 / 10), wide viscosity range (<400CP), good heat transfer effect, large processing capacity, etc., suitable for heat sensitivity, high concentration, viscosity The evaporation of...
DLTS series single screw hydro-extractor is equipment adopted mechanical direct pressure method to dehydrate wet material.The dehydrated material can directly enter into the next procedure of drying equipment; it greatly reduces the energy consumption of drying.This machine absorbs the characteristics of similar foreign products, has the characteristics of simple structure, unique design, convenient operation and maintenance. Process performance reaches the advanced level of similar foreign p...
In the corn starch processing technology, after the light liquid (dilute protein) of the separator is pressed by a plate and frame filter press, the protein powder produced is large in size, about 50% water, and has a certain viscosity. Before entering the tube bundle dryer, it is necessary to perform the crushing. The traditional crusher is used for crushing, and the effect is not ideal. The new wet protein crusher independently developed by our company has completely solved this problem tha...
The advantages of the spray type sulfur tower over the traditional ceramic sulfur tower, spray type sulfur tower and glass fiber reinforced plastic absorption tower are mainly reflected in the following aspects:
1. The spray type sulfur tower is easy to operate, and the produced sulfurous acid concentration is stable, which reduces the odor of so2 and reduces environmental pollution.
2. The spray type sulfur tower is easy to repair and maintain. If the effect is good, there is no maintenance...
In order to obtain the required efficiency, degermination is carried out in two stages, each stage consisting of two separation passes.
Working principle
The starch slurry containing cracked steeped corn and germ is fed tangentially into the first pass cyclone with sufficient velocity to create a vortex action forcing the slurry into a spiral. As the rapidly rotating flow spins about the axis of the cone, the lighter germ fraction is forced to spiral inward and out through a centrally located...
The air dryer uses high-speed hot air to suspend the mud-like, powdery and granular materials in the air. Large heat transfer surface area, high heat transfer coefficient, short drying time (most materials only need a few seconds to dry), suitable for drying heat-sensitive materials. This equipment is widely used in the drying of powdery and granular materials in food, chemical, pharmaceutical, building materials and other industries. The products that have been used in this series of dryers ...
This device is made of motor, reduction gears, draught fan, drying tube and shell body.
Working principle
Steam heat drying tube at first, material get into shell body, drying tube rotated by motor, meanwhile, stir fry and push materials, the wet steam will be discharged to outdoor by draught fan.
Equipment characteristic
1. Advantages: low steam consumption, low electricity consumption, wide range of drying material, large output, large water evaporation, high moisture material which can d...
DLTS series single screw hydro-extractor is equipment adopted mechanical direct pressure method to dehydrate wet material.The dehydrated material can directly enter into the next procedure of drying equipment; it greatly reduces the energy consumption of drying.This machine absorbs the characteristics of similar foreign products, has the characteristics of simple structure, unique design, convenient operation and maintenance. Process performance reaches the advanced level of similar foreign p...