The advantages of the spray type sulfur tower over the traditional ceramic sulfur tower, spray type sulfur tower and glass fiber reinforced plastic absorption tower are mainly reflected in the following aspects:
1. The spray type sulfur tower is easy to operate, and the produced sulfurous acid concentration is stable, which reduces the odor of so2 and reduces environmental pollution.
2. The spray type sulfur tower is easy to repair and maintain. If the effect is good, there is no maintenance...
The LS type screw conveyor is a new type of conveying device for continuously conveying powder and granular objects in a closed circular cross-section housing by means of a rotating spiral. The head and tail bearings are moved to the outside of the casing. The sling bearing adopts sliding bearing and is equipped with dust-proof sealing device. The whole machine has high reliability, long service life, strong adaptability, convenient installation and maintenance, and flexible arrangement of in...
The air dryer uses high-speed hot air to suspend the mud-like, powdery and granular materials in the air. Large heat transfer surface area, high heat transfer coefficient, short drying time (most materials only need a few seconds to dry), suitable for drying heat-sensitive materials. This equipment is widely used in the drying of powdery and granular materials in food, chemical, pharmaceutical, building materials and other industries. The products that have been used in this series of dryers ...
It is a small and medium-sized crushing equipment, which can crush various granular feed materials such as corn, sorghum, wheat, beans, etc. It is widely used in the processing of concentrate feed for agriculture, animal husbandry and fishery and the processing of roughage such as rice husk.
SFSP series hammer mill is the essence of the users of Zhucheng Weitai Food Machinery Co., Ltd. which integrates the essence of similar products in the country, through digestion and absorption of foreign...
The air dryer uses high-speed hot air to suspend the mud-like, powdery and granular materials in the air. Large heat transfer surface area, high heat transfer coefficient, short drying time (most materials only need a few seconds to dry), suitable for drying heat-sensitive materials. This equipment is widely used in the drying of powdery and granular materials in food, chemical, pharmaceutical, building materials and other industries. The products that have been used in this series of dryers ...
Working Principle
After a grinding process of the socked corn, the crushed corn pieces will fall into the grinding chamber through the inlet under the action of gravity, and then be thrown to the fixed and moving discs. Since the relative rotation of the 2 discs and the special layout of discs, the corn particles will bear a centrifugal force and be thrown out of the discs. In this process, the corn kernels rub and hit with each other to get crushed. While the mutual impact between the partic...
Technical parameters
Type
Separation cylinder diameter(mm)
Production capacity commodity corn(t/d)
Feed pressure(Mpa)
Recoil pressure(Mpa)
Dimensions(mm)
SPX-360
360
150
0.1
0.1
580×430×1520
SPX-450
450
300
0.2
0.2
1129×970×2538
SPX-750
750
500
0.25
0.25
1200×900×2730
SPX-1000
1000
1600
0.35
0.35
1500×1150×3420
Anyone who pumps liquid for any purpose (irrigation, industrial, or private and public water systems) knows their greatest enemy is sand, silt, grit or other s...
In the corn starch processing technology, after the light liquid (dilute protein) of the separator is pressed by a plate and frame filter press, the protein powder produced is large in size, about 50% water, and has a certain viscosity. Before entering the tube bundle dryer, it is necessary to perform the crushing. The traditional crusher is used for crushing, and the effect is not ideal. The new wet protein crusher independently developed by our company has completely solved this problem tha...
The multi effect falling film evaporator uses the falling film evaporation principle to heat and boil the dilute solution to vaporize part of the water to achieve the purpose of concentrating the solution. This unit adopts continuous production process, which has the advantages of large concentration ratio (1 / 5-1 / 10), wide viscosity range (<400CP), good heat transfer effect, large processing capacity, etc., suitable for heat sensitivity, high concentration, viscosity The evaporation of...
In order to obtain the required efficiency, degermination is carried out in two stages, each stage consisting of two separation passes.
Working principle
The starch slurry containing cracked steeped corn and germ is fed tangentially into the first pass cyclone with sufficient velocity to create a vortex action forcing the slurry into a spiral. As the rapidly rotating flow spins about the axis of the cone, the lighter germ fraction is forced to spiral inward and out through a centrally located...
It is a small and medium-sized crushing equipment, which can crush various granular feed materials such as corn, sorghum, wheat, beans, etc. It is widely used in the processing of concentrate feed for agriculture, animal husbandry and fishery and the processing of roughage such as rice husk.
SFSP series hammer mill is the essence of the users of Zhucheng Weitai Food Machinery Co., Ltd. which integrates the essence of similar products in the country, through digestion and absorption of foreign...
This device is made of motor, reduction gears, draught fan, drying tube and shell body.
Working principle
Steam heat drying tube at first, material get into shell body, drying tube rotated by motor, meanwhile, stir fry and push materials, the wet steam will be discharged to outdoor by draught fan.
Equipment characteristic
1. Advantages: low steam consumption, low electricity consumption, wide range of drying material, large output, large water evaporation, high moisture material which can d...