Pressure curved sieve is one of the most advanced starch equipment at home and abroad. The pressure curved sieve is screened by multi-access counter current washing process, which can effectively improve the powder yield and starch quality, has significant economic benefits.
Echnical parameters
No.
Item
Single Unit
Duplex
1
Screen surface arc angle
120°
120°
2
Screen surface width
50um/75um/100um/120um
50um/75um/100um/120um
3
Material handling capacity
42-57m³/h
85-115m³/h
4
Feed p...
Technical parameters
Type
Separation cylinder diameter(mm)
Production capacity commodity corn(t/d)
Feed pressure(Mpa)
Recoil pressure(Mpa)
Dimensions(mm)
SPX-360
360
150
0.1
0.1
580×430×1520
SPX-450
450
300
0.2
0.2
1129×970×2538
SPX-750
750
500
0.25
0.25
1200×900×2730
SPX-1000
1000
1600
0.35
0.35
1500×1150×3420
Anyone who pumps liquid for any purpose (irrigation, industrial, or private and public water systems) knows their greatest enemy is sand, silt, grit or other s...
Used for filtering and removing impurities from liquids. Working principle: After the untreated suspension is sent to the filter cartridge, solid phase particles larger than the outer diameter of the small hole on the filter cartridge are retained by the filter cartridge and sent to the bottom of the filter by a rotating brush. The filtered liquid is sent out from the liquid discharge pipe, and the filtered impurities can be discharged with the liquid flow through the impurity overflow valve ...
Technical parameters
Type
Separation cylinder diameter(mm)
Production capacity commodity corn(t/d)
Feed pressure(Mpa)
Recoil pressure(Mpa)
Dimensions(mm)
SPX-360
360
150
0.1
0.1
580×430×1520
SPX-450
450
300
0.2
0.2
1129×970×2538
SPX-750
750
500
0.25
0.25
1200×900×2730
SPX-1000
1000
1600
0.35
0.35
1500×1150×3420
Anyone who pumps liquid for any purpose (irrigation, industrial, or private and public water systems) knows their greatest enemy is sand, silt, grit or other s...
Working Principle
After a grinding process of the socked corn, the crushed corn pieces will fall into the grinding chamber through the inlet under the action of gravity, and then be thrown to the fixed and moving discs. Since the relative rotation of the 2 discs and the special layout of discs, the corn particles will bear a centrifugal force and be thrown out of the discs. In this process, the corn kernels rub and hit with each other to get crushed. While the mutual impact between the partic...
The multi effect falling film evaporator uses the falling film evaporation principle to heat and boil the dilute solution to vaporize part of the water to achieve the purpose of concentrating the solution. This unit adopts continuous production process, which has the advantages of large concentration ratio (1 / 5-1 / 10), wide viscosity range (<400CP), good heat transfer effect, large processing capacity, etc., suitable for heat sensitivity, high concentration, viscosity The evaporation of...
The dual-shaft mixer is also known as a wet and dry mixer. The materials in the machine are subjected to compound motion by two rotors in opposite directions. The paddles with animal material rotate counterclockwise along the inner wall of the machine slot, and the animal material is turned left and right. A weightless area is formed at the intersection of the two rotors. In this area, regardless of the shape, size and density of the material, the material can be floated in an instant weightl...
The LS type screw conveyor is a new type of conveying device for continuously conveying powder and granular objects in a closed circular cross-section housing by means of a rotating spiral. The head and tail bearings are moved to the outside of the casing. The sling bearing adopts sliding bearing and is equipped with dust-proof sealing device. The whole machine has high reliability, long service life, strong adaptability, convenient installation and maintenance, and flexible arrangement of in...
The dual-shaft mixer is also known as a wet and dry mixer. The materials in the machine are subjected to compound motion by two rotors in opposite directions. The paddles with animal material rotate counterclockwise along the inner wall of the machine slot, and the animal material is turned left and right. A weightless area is formed at the intersection of the two rotors. In this area, regardless of the shape, size and density of the material, the material can be floated in an instant weightl...
Technical parameters
Type
Separation cylinder diameter(mm)
Production capacity commodity corn(t/d)
Feed pressure(Mpa)
Recoil pressure(Mpa)
Dimensions(mm)
SPX-360
360
150
0.1
0.1
580×430×1520
SPX-450
450
300
0.2
0.2
1129×970×2538
SPX-750
750
500
0.25
0.25
1200×900×2730
SPX-1000
1000
1600
0.35
0.35
1500×1150×3420
Anyone who pumps liquid for any purpose (irrigation, industrial, or private and public water systems) knows their greatest enemy is sand, silt, grit or other s...
Used for filtering and removing impurities from liquids. Working principle: After the untreated suspension is sent to the filter cartridge, solid phase particles larger than the outer diameter of the small hole on the filter cartridge are retained by the filter cartridge and sent to the bottom of the filter by a rotating brush. The filtered liquid is sent out from the liquid discharge pipe, and the filtered impurities can be discharged with the liquid flow through the impurity overflow valve ...
This device is made of motor, reduction gears, draught fan, drying tube and shell body.
Working principle
Steam heat drying tube at first, material get into shell body, drying tube rotated by motor, meanwhile, stir fry and push materials, the wet steam will be discharged to outdoor by draught fan.
Equipment characteristic
1. Advantages: low steam consumption, low electricity consumption, wide range of drying material, large output, large water evaporation, high moisture material which can d...