This device is made of motor, reduction gears, draught fan, drying tube and shell body.
Working principle
Steam heat drying tube at first, material get into shell body, drying tube rotated by motor, meanwhile, stir fry and push materials, the wet steam will be discharged to outdoor by draught fan.
Equipment characteristic
1. Advantages: low steam consumption, low electricity consumption, wide range of drying material, large output, large water evaporation, high moisture material which can d...
Technical parameters
Type
Separation cylinder diameter(mm)
Production capacity commodity corn(t/d)
Feed pressure(Mpa)
Recoil pressure(Mpa)
Dimensions(mm)
SPX-360
360
150
0.1
0.1
580×430×1520
SPX-450
450
300
0.2
0.2
1129×970×2538
SPX-750
750
500
0.25
0.25
1200×900×2730
SPX-1000
1000
1600
0.35
0.35
1500×1150×3420
Anyone who pumps liquid for any purpose (irrigation, industrial, or private and public water systems) knows their greatest enemy is sand, silt, grit or other s...
This device is made of motor, reduction gears, draught fan, drying tube and shell body.
Working principle
Steam heat drying tube at first, material get into shell body, drying tube rotated by motor, meanwhile, stir fry and push materials, the wet steam will be discharged to outdoor by draught fan.
Equipment characteristic
1. Advantages: low steam consumption, low electricity consumption, wide range of drying material, large output, large water evaporation, high moisture material which can d...
In order to obtain the required efficiency, degermination is carried out in two stages, each stage consisting of two separation passes.
Working principle
The starch slurry containing cracked steeped corn and germ is fed tangentially into the first pass cyclone with sufficient velocity to create a vortex action forcing the slurry into a spiral. As the rapidly rotating flow spins about the axis of the cone, the lighter germ fraction is forced to spiral inward and out through a centrally located...
The LS type screw conveyor is a new type of conveying device for continuously conveying powder and granular objects in a closed circular cross-section housing by means of a rotating spiral. The head and tail bearings are moved to the outside of the casing. The sling bearing adopts sliding bearing and is equipped with dust-proof sealing device. The whole machine has high reliability, long service life, strong adaptability, convenient installation and maintenance, and flexible arrangement of in...
The air dryer uses high-speed hot air to suspend the mud-like, powdery and granular materials in the air. Large heat transfer surface area, high heat transfer coefficient, short drying time (most materials only need a few seconds to dry), suitable for drying heat-sensitive materials. This equipment is widely used in the drying of powdery and granular materials in food, chemical, pharmaceutical, building materials and other industries. The products that have been used in this series of dryers ...
It is a small and medium-sized crushing equipment, which can crush various granular feed materials such as corn, sorghum, wheat, beans, etc. It is widely used in the processing of concentrate feed for agriculture, animal husbandry and fishery and the processing of roughage such as rice husk.
SFSP series hammer mill is the essence of the users of Zhucheng Weitai Food Machinery Co., Ltd. which integrates the essence of similar products in the country, through digestion and absorption of foreign...
Working Principle
After a grinding process of the socked corn, the crushed corn pieces will fall into the grinding chamber through the inlet under the action of gravity, and then be thrown to the fixed and moving discs. Since the relative rotation of the 2 discs and the special layout of discs, the corn particles will bear a centrifugal force and be thrown out of the discs. In this process, the corn kernels rub and hit with each other to get crushed. While the mutual impact between the partic...
In order to obtain the required efficiency, degermination is carried out in two stages, each stage consisting of two separation passes.
Working principle
The starch slurry containing cracked steeped corn and germ is fed tangentially into the first pass cyclone with sufficient velocity to create a vortex action forcing the slurry into a spiral. As the rapidly rotating flow spins about the axis of the cone, the lighter germ fraction is forced to spiral inward and out through a centrally located...
This device is made of motor, reduction gears, draught fan, drying tube and shell body.
Working principle
Steam heat drying tube at first, material get into shell body, drying tube rotated by motor, meanwhile, stir fry and push materials, the wet steam will be discharged to outdoor by draught fan.
Equipment characteristic
1. Advantages: low steam consumption, low electricity consumption, wide range of drying material, large output, large water evaporation, high moisture material which can d...
DLTS series single screw hydro-extractor is equipment adopted mechanical direct pressure method to dehydrate wet material.The dehydrated material can directly enter into the next procedure of drying equipment; it greatly reduces the energy consumption of drying.This machine absorbs the characteristics of similar foreign products, has the characteristics of simple structure, unique design, convenient operation and maintenance. Process performance reaches the advanced level of similar foreign p...
The dual-shaft mixer is also known as a wet and dry mixer. The materials in the machine are subjected to compound motion by two rotors in opposite directions. The paddles with animal material rotate counterclockwise along the inner wall of the machine slot, and the animal material is turned left and right. A weightless area is formed at the intersection of the two rotors. In this area, regardless of the shape, size and density of the material, the material can be floated in an instant weightl...