DLTS series single screw hydro-extractor is equipment adopted mechanical direct pressure method to dehydrate wet material.The dehydrated material can directly enter into the next procedure of drying equipment; it greatly reduces the energy consumption of drying.This machine absorbs the characteristics of similar foreign products, has the characteristics of simple structure, unique design, convenient operation and maintenance. Process performance reaches the advanced level of similar foreign p...
Technical parameters
Type
Separation cylinder diameter(mm)
Production capacity commodity corn(t/d)
Feed pressure(Mpa)
Recoil pressure(Mpa)
Dimensions(mm)
SPX-360
360
150
0.1
0.1
580×430×1520
SPX-450
450
300
0.2
0.2
1129×970×2538
SPX-750
750
500
0.25
0.25
1200×900×2730
SPX-1000
1000
1600
0.35
0.35
1500×1150×3420
Anyone who pumps liquid for any purpose (irrigation, industrial, or private and public water systems) knows their greatest enemy is sand, silt, grit or other s...
The air dryer uses high-speed hot air to suspend the mud-like, powdery and granular materials in the air. Large heat transfer surface area, high heat transfer coefficient, short drying time (most materials only need a few seconds to dry), suitable for drying heat-sensitive materials. This equipment is widely used in the drying of powdery and granular materials in food, chemical, pharmaceutical, building materials and other industries. The products that have been used in this series of dryers ...
Main feature
◎ Manufactured using international quality standards.
◎ Advanced lubrication system: low power, low energy consumption, small fuel consumption, low use cost.
◎ Water-cooled device improves the operating temperature of the bearing and increases the service life.
◎ Supported by a certain flexible bearing seat, the equipment has less vibration and more stable operation.
◎ Adopt 5V united belt automatic tensioning device, high transmission efficiency, stable and reliable operation, l...
Used for filtering and removing impurities from liquids. Working principle: After the untreated suspension is sent to the filter cartridge, solid phase particles larger than the outer diameter of the small hole on the filter cartridge are retained by the filter cartridge and sent to the bottom of the filter by a rotating brush. The filtered liquid is sent out from the liquid discharge pipe, and the filtered impurities can be discharged with the liquid flow through the impurity overflow valve ...
Pressure curved sieve is one of the most advanced starch equipment at home and abroad. The pressure curved sieve is screened by multi-access counter current washing process, which can effectively improve the powder yield and starch quality, has significant economic benefits.
Echnical parameters
No.
Item
Single Unit
Duplex
1
Screen surface arc angle
120°
120°
2
Screen surface width
50um/75um/100um/120um
50um/75um/100um/120um
3
Material handling capacity
42-57m³/h
85-115m³/h
4
Feed p...
Pressure curved sieve is one of the most advanced starch equipment at home and abroad. The pressure curved sieve is screened by multi-access counter current washing process, which can effectively improve the powder yield and starch quality, has significant economic benefits.
Echnical parameters
No.
Item
Single Unit
Duplex
1
Screen surface arc angle
120°
120°
2
Screen surface width
50um/75um/100um/120um
50um/75um/100um/120um
3
Material handling capacity
42-57m³/h
85-115m³/h
4
Feed p...
Working Principle
After a grinding process of the socked corn, the crushed corn pieces will fall into the grinding chamber through the inlet under the action of gravity, and then be thrown to the fixed and moving discs. Since the relative rotation of the 2 discs and the special layout of discs, the corn particles will bear a centrifugal force and be thrown out of the discs. In this process, the corn kernels rub and hit with each other to get crushed. While the mutual impact between the partic...
In the corn starch processing technology, after the light liquid (dilute protein) of the separator is pressed by a plate and frame filter press, the protein powder produced is large in size, about 50% water, and has a certain viscosity. Before entering the tube bundle dryer, it is necessary to perform the crushing. The traditional crusher is used for crushing, and the effect is not ideal. The new wet protein crusher independently developed by our company has completely solved this problem tha...
In the corn starch processing technology, after the light liquid (dilute protein) of the separator is pressed by a plate and frame filter press, the protein powder produced is large in size, about 50% water, and has a certain viscosity. Before entering the tube bundle dryer, it is necessary to perform the crushing. The traditional crusher is used for crushing, and the effect is not ideal. The new wet protein crusher independently developed by our company has completely solved this problem tha...
This device is made of motor, reduction gears, draught fan, drying tube and shell body.
Working principle
Steam heat drying tube at first, material get into shell body, drying tube rotated by motor, meanwhile, stir fry and push materials, the wet steam will be discharged to outdoor by draught fan.
Equipment characteristic
1. Advantages: low steam consumption, low electricity consumption, wide range of drying material, large output, large water evaporation, high moisture material which can d...
It is a small and medium-sized crushing equipment, which can crush various granular feed materials such as corn, sorghum, wheat, beans, etc. It is widely used in the processing of concentrate feed for agriculture, animal husbandry and fishery and the processing of roughage such as rice husk.
SFSP series hammer mill is the essence of the users of Zhucheng Weitai Food Machinery Co., Ltd. which integrates the essence of similar products in the country, through digestion and absorption of foreign...