This device is made of motor, reduction gears, draught fan, drying tube and shell body.
Working principle
Steam heat drying tube at first, material get into shell body, drying tube rotated by motor, meanwhile, stir fry and push materials, the wet steam will be discharged to outdoor by draught fan.
Equipment characteristic
1. Advantages: low steam consumption, low electricity consumption, wide range of drying material, large output, large water evaporation, high moisture material which can d...
This device is made of motor, reduction gears, draught fan, drying tube and shell body.
Working principle
Steam heat drying tube at first, material get into shell body, drying tube rotated by motor, meanwhile, stir fry and push materials, the wet steam will be discharged to outdoor by draught fan.
Equipment characteristic
1. Advantages: low steam consumption, low electricity consumption, wide range of drying material, large output, large water evaporation, high moisture material which can d...
Used for filtering and removing impurities from liquids. Working principle: After the untreated suspension is sent to the filter cartridge, solid phase particles larger than the outer diameter of the small hole on the filter cartridge are retained by the filter cartridge and sent to the bottom of the filter by a rotating brush. The filtered liquid is sent out from the liquid discharge pipe, and the filtered impurities can be discharged with the liquid flow through the impurity overflow valve ...
The dual-shaft mixer is also known as a wet and dry mixer. The materials in the machine are subjected to compound motion by two rotors in opposite directions. The paddles with animal material rotate counterclockwise along the inner wall of the machine slot, and the animal material is turned left and right. A weightless area is formed at the intersection of the two rotors. In this area, regardless of the shape, size and density of the material, the material can be floated in an instant weightl...
Technical parameters
Type
Separation cylinder diameter(mm)
Production capacity commodity corn(t/d)
Feed pressure(Mpa)
Recoil pressure(Mpa)
Dimensions(mm)
SPX-360
360
150
0.1
0.1
580×430×1520
SPX-450
450
300
0.2
0.2
1129×970×2538
SPX-750
750
500
0.25
0.25
1200×900×2730
SPX-1000
1000
1600
0.35
0.35
1500×1150×3420
Anyone who pumps liquid for any purpose (irrigation, industrial, or private and public water systems) knows their greatest enemy is sand, silt, grit or other s...
The dual-shaft mixer is also known as a wet and dry mixer. The materials in the machine are subjected to compound motion by two rotors in opposite directions. The paddles with animal material rotate counterclockwise along the inner wall of the machine slot, and the animal material is turned left and right. A weightless area is formed at the intersection of the two rotors. In this area, regardless of the shape, size and density of the material, the material can be floated in an instant weightl...
The LS type screw conveyor is a new type of conveying device for continuously conveying powder and granular objects in a closed circular cross-section housing by means of a rotating spiral. The head and tail bearings are moved to the outside of the casing. The sling bearing adopts sliding bearing and is equipped with dust-proof sealing device. The whole machine has high reliability, long service life, strong adaptability, convenient installation and maintenance, and flexible arrangement of in...
Technical parameters
Type
Separation cylinder diameter(mm)
Production capacity commodity corn(t/d)
Feed pressure(Mpa)
Recoil pressure(Mpa)
Dimensions(mm)
SPX-360
360
150
0.1
0.1
580×430×1520
SPX-450
450
300
0.2
0.2
1129×970×2538
SPX-750
750
500
0.25
0.25
1200×900×2730
SPX-1000
1000
1600
0.35
0.35
1500×1150×3420
Anyone who pumps liquid for any purpose (irrigation, industrial, or private and public water systems) knows their greatest enemy is sand, silt, grit or other s...
The multi effect falling film evaporator uses the falling film evaporation principle to heat and boil the dilute solution to vaporize part of the water to achieve the purpose of concentrating the solution. This unit adopts continuous production process, which has the advantages of large concentration ratio (1 / 5-1 / 10), wide viscosity range (<400CP), good heat transfer effect, large processing capacity, etc., suitable for heat sensitivity, high concentration, viscosity The evaporation of...
Used for filtering and removing impurities from liquids. Working principle: After the untreated suspension is sent to the filter cartridge, solid phase particles larger than the outer diameter of the small hole on the filter cartridge are retained by the filter cartridge and sent to the bottom of the filter by a rotating brush. The filtered liquid is sent out from the liquid discharge pipe, and the filtered impurities can be discharged with the liquid flow through the impurity overflow valve ...
Main feature
◎ Manufactured using international quality standards.
◎ Advanced lubrication system: low power, low energy consumption, small fuel consumption, low use cost.
◎ Water-cooled device improves the operating temperature of the bearing and increases the service life.
◎ Supported by a certain flexible bearing seat, the equipment has less vibration and more stable operation.
◎ Adopt 5V united belt automatic tensioning device, high transmission efficiency, stable and reliable operation, l...
Main feature
◎ Manufactured using international quality standards.
◎ Advanced lubrication system: low power, low energy consumption, small fuel consumption, low use cost.
◎ Water-cooled device improves the operating temperature of the bearing and increases the service life.
◎ Supported by a certain flexible bearing seat, the equipment has less vibration and more stable operation.
◎ Adopt 5V united belt automatic tensioning device, high transmission efficiency, stable and reliable operation, l...