QZ series gravity screen is a new high-efficiency screening machine. Its main working part is a concave screen surface with certain radian. The screen is made by splicing some stainless steel wedge-shaped bars together. This sieve bend is competent in finishing screening, dewatering, cleaning, extraction, and solid impurity removal in heavy-duty screening occasions. It has found great popularity in corn dewatering, corn germ dewatering and cleaning, and crude/fine fiber separation in starch i...
The LS type screw conveyor is a new type of conveying device for continuously conveying powder and granular objects in a closed circular cross-section housing by means of a rotating spiral. The head and tail bearings are moved to the outside of the casing. The sling bearing adopts sliding bearing and is equipped with dust-proof sealing device. The whole machine has high reliability, long service life, strong adaptability, convenient installation and maintenance, and flexible arrangement of in...
Used for filtering and removing impurities from liquids. Working principle: After the untreated suspension is sent to the filter cartridge, solid phase particles larger than the outer diameter of the small hole on the filter cartridge are retained by the filter cartridge and sent to the bottom of the filter by a rotating brush. The filtered liquid is sent out from the liquid discharge pipe, and the filtered impurities can be discharged with the liquid flow through the impurity overflow valve ...
The positive pressure filter is a filter placed in a closed pressurized warehouse. A scraper conveyor is arranged under the falling slot of the disc filter, and a discharge device is installed at the head. The filtered suspension is fed into the tank of the filter by the feed pump, and the pressurized chamber is filled with a certain pressure of compressed air. On the filter disc, a pressure difference is formed between the filter valve and the air-water separator through the atmosphere. Unde...
The positive pressure filter is a filter placed in a closed pressurized warehouse. A scraper conveyor is arranged under the falling slot of the disc filter, and a discharge device is installed at the head. The filtered suspension is fed into the tank of the filter by the feed pump, and the pressurized chamber is filled with a certain pressure of compressed air. On the filter disc, a pressure difference is formed between the filter valve and the air-water separator through the atmosphere. Unde...
Main feature
◎ Manufactured using international quality standards.
◎ Advanced lubrication system: low power, low energy consumption, small fuel consumption, low use cost.
◎ Water-cooled device improves the operating temperature of the bearing and increases the service life.
◎ Supported by a certain flexible bearing seat, the equipment has less vibration and more stable operation.
◎ Adopt 5V united belt automatic tensioning device, high transmission efficiency, stable and reliable operation, l...
In order to obtain the required efficiency, degermination is carried out in two stages, each stage consisting of two separation passes.
Working principle
The starch slurry containing cracked steeped corn and germ is fed tangentially into the first pass cyclone with sufficient velocity to create a vortex action forcing the slurry into a spiral. As the rapidly rotating flow spins about the axis of the cone, the lighter germ fraction is forced to spiral inward and out through a centrally located...
DLTS series single screw hydro-extractor is equipment adopted mechanical direct pressure method to dehydrate wet material.The dehydrated material can directly enter into the next procedure of drying equipment; it greatly reduces the energy consumption of drying.This machine absorbs the characteristics of similar foreign products, has the characteristics of simple structure, unique design, convenient operation and maintenance. Process performance reaches the advanced level of similar foreign p...
Technical parameters
Type
Separation cylinder diameter(mm)
Production capacity commodity corn(t/d)
Feed pressure(Mpa)
Recoil pressure(Mpa)
Dimensions(mm)
SPX-360
360
150
0.1
0.1
580×430×1520
SPX-450
450
300
0.2
0.2
1129×970×2538
SPX-750
750
500
0.25
0.25
1200×900×2730
SPX-1000
1000
1600
0.35
0.35
1500×1150×3420
Anyone who pumps liquid for any purpose (irrigation, industrial, or private and public water systems) knows their greatest enemy is sand, silt, grit or other s...
The dual-shaft mixer is also known as a wet and dry mixer. The materials in the machine are subjected to compound motion by two rotors in opposite directions. The paddles with animal material rotate counterclockwise along the inner wall of the machine slot, and the animal material is turned left and right. A weightless area is formed at the intersection of the two rotors. In this area, regardless of the shape, size and density of the material, the material can be floated in an instant weightl...
The dual-shaft mixer is also known as a wet and dry mixer. The materials in the machine are subjected to compound motion by two rotors in opposite directions. The paddles with animal material rotate counterclockwise along the inner wall of the machine slot, and the animal material is turned left and right. A weightless area is formed at the intersection of the two rotors. In this area, regardless of the shape, size and density of the material, the material can be floated in an instant weightl...
Main feature
◎ Manufactured using international quality standards.
◎ Advanced lubrication system: low power, low energy consumption, small fuel consumption, low use cost.
◎ Water-cooled device improves the operating temperature of the bearing and increases the service life.
◎ Supported by a certain flexible bearing seat, the equipment has less vibration and more stable operation.
◎ Adopt 5V united belt automatic tensioning device, high transmission efficiency, stable and reliable operation, l...