Technical parameters
Type
Separation cylinder diameter(mm)
Production capacity commodity corn(t/d)
Feed pressure(Mpa)
Recoil pressure(Mpa)
Dimensions(mm)
SPX-360
360
150
0.1
0.1
580×430×1520
SPX-450
450
300
0.2
0.2
1129×970×2538
SPX-750
750
500
0.25
0.25
1200×900×2730
SPX-1000
1000
1600
0.35
0.35
1500×1150×3420
Anyone who pumps liquid for any purpose (irrigation, industrial, or private and public water systems) knows their greatest enemy is sand, silt, grit or other s...
The multi effect falling film evaporator uses the falling film evaporation principle to heat and boil the dilute solution to vaporize part of the water to achieve the purpose of concentrating the solution. This unit adopts continuous production process, which has the advantages of large concentration ratio (1 / 5-1 / 10), wide viscosity range (<400CP), good heat transfer effect, large processing capacity, etc., suitable for heat sensitivity, high concentration, viscosity The evaporation of...
DLTS series single screw hydro-extractor is equipment adopted mechanical direct pressure method to dehydrate wet material.The dehydrated material can directly enter into the next procedure of drying equipment; it greatly reduces the energy consumption of drying.This machine absorbs the characteristics of similar foreign products, has the characteristics of simple structure, unique design, convenient operation and maintenance. Process performance reaches the advanced level of similar foreign p...
The dual-shaft mixer is also known as a wet and dry mixer. The materials in the machine are subjected to compound motion by two rotors in opposite directions. The paddles with animal material rotate counterclockwise along the inner wall of the machine slot, and the animal material is turned left and right. A weightless area is formed at the intersection of the two rotors. In this area, regardless of the shape, size and density of the material, the material can be floated in an instant weightl...
DLTS series single screw hydro-extractor is equipment adopted mechanical direct pressure method to dehydrate wet material.The dehydrated material can directly enter into the next procedure of drying equipment; it greatly reduces the energy consumption of drying.This machine absorbs the characteristics of similar foreign products, has the characteristics of simple structure, unique design, convenient operation and maintenance. Process performance reaches the advanced level of similar foreign p...
The advantages of the spray type sulfur tower over the traditional ceramic sulfur tower, spray type sulfur tower and glass fiber reinforced plastic absorption tower are mainly reflected in the following aspects:
1. The spray type sulfur tower is easy to operate, and the produced sulfurous acid concentration is stable, which reduces the odor of so2 and reduces environmental pollution.
2. The spray type sulfur tower is easy to repair and maintain. If the effect is good, there is no maintenance...
Working Principle
After a grinding process of the socked corn, the crushed corn pieces will fall into the grinding chamber through the inlet under the action of gravity, and then be thrown to the fixed and moving discs. Since the relative rotation of the 2 discs and the special layout of discs, the corn particles will bear a centrifugal force and be thrown out of the discs. In this process, the corn kernels rub and hit with each other to get crushed. While the mutual impact between the partic...
QZ series gravity screen is a new high-efficiency screening machine. Its main working part is a concave screen surface with certain radian. The screen is made by splicing some stainless steel wedge-shaped bars together. This sieve bend is competent in finishing screening, dewatering, cleaning, extraction, and solid impurity removal in heavy-duty screening occasions. It has found great popularity in corn dewatering, corn germ dewatering and cleaning, and crude/fine fiber separation in starch i...
The air dryer uses high-speed hot air to suspend the mud-like, powdery and granular materials in the air. Large heat transfer surface area, high heat transfer coefficient, short drying time (most materials only need a few seconds to dry), suitable for drying heat-sensitive materials. This equipment is widely used in the drying of powdery and granular materials in food, chemical, pharmaceutical, building materials and other industries. The products that have been used in this series of dryers ...
The LS type screw conveyor is a new type of conveying device for continuously conveying powder and granular objects in a closed circular cross-section housing by means of a rotating spiral. The head and tail bearings are moved to the outside of the casing. The sling bearing adopts sliding bearing and is equipped with dust-proof sealing device. The whole machine has high reliability, long service life, strong adaptability, convenient installation and maintenance, and flexible arrangement of in...
The positive pressure filter is a filter placed in a closed pressurized warehouse. A scraper conveyor is arranged under the falling slot of the disc filter, and a discharge device is installed at the head. The filtered suspension is fed into the tank of the filter by the feed pump, and the pressurized chamber is filled with a certain pressure of compressed air. On the filter disc, a pressure difference is formed between the filter valve and the air-water separator through the atmosphere. Unde...
Technical parameters
Type
Separation cylinder diameter(mm)
Production capacity commodity corn(t/d)
Feed pressure(Mpa)
Recoil pressure(Mpa)
Dimensions(mm)
SPX-360
360
150
0.1
0.1
580×430×1520
SPX-450
450
300
0.2
0.2
1129×970×2538
SPX-750
750
500
0.25
0.25
1200×900×2730
SPX-1000
1000
1600
0.35
0.35
1500×1150×3420
Anyone who pumps liquid for any purpose (irrigation, industrial, or private and public water systems) knows their greatest enemy is sand, silt, grit or other s...