This device is made of motor, reduction gears, draught fan, drying tube and shell body.
Working principle
Steam heat drying tube at first, material get into shell body, drying tube rotated by motor, meanwhile, stir fry and push materials, the wet steam will be discharged to outdoor by draught fan.
Equipment characteristic
1. Advantages: low steam consumption, low electricity consumption, wide range of drying material, large output, large water evaporation, high moisture material which can d...
Used for filtering and removing impurities from liquids. Working principle: After the untreated suspension is sent to the filter cartridge, solid phase particles larger than the outer diameter of the small hole on the filter cartridge are retained by the filter cartridge and sent to the bottom of the filter by a rotating brush. The filtered liquid is sent out from the liquid discharge pipe, and the filtered impurities can be discharged with the liquid flow through the impurity overflow valve ...
The LS type screw conveyor is a new type of conveying device for continuously conveying powder and granular objects in a closed circular cross-section housing by means of a rotating spiral. The head and tail bearings are moved to the outside of the casing. The sling bearing adopts sliding bearing and is equipped with dust-proof sealing device. The whole machine has high reliability, long service life, strong adaptability, convenient installation and maintenance, and flexible arrangement of in...
In the corn starch processing technology, after the light liquid (dilute protein) of the separator is pressed by a plate and frame filter press, the protein powder produced is large in size, about 50% water, and has a certain viscosity. Before entering the tube bundle dryer, it is necessary to perform the crushing. The traditional crusher is used for crushing, and the effect is not ideal. The new wet protein crusher independently developed by our company has completely solved this problem tha...
In order to obtain the required efficiency, degermination is carried out in two stages, each stage consisting of two separation passes.
Working principle
The starch slurry containing cracked steeped corn and germ is fed tangentially into the first pass cyclone with sufficient velocity to create a vortex action forcing the slurry into a spiral. As the rapidly rotating flow spins about the axis of the cone, the lighter germ fraction is forced to spiral inward and out through a centrally located...
Pressure curved sieve is one of the most advanced starch equipment at home and abroad. The pressure curved sieve is screened by multi-access counter current washing process, which can effectively improve the powder yield and starch quality, has significant economic benefits.
Echnical parameters
No.
Item
Single Unit
Duplex
1
Screen surface arc angle
120°
120°
2
Screen surface width
50um/75um/100um/120um
50um/75um/100um/120um
3
Material handling capacity
42-57m³/h
85-115m³/h
4
Feed p...
Main feature
◎ Manufactured using international quality standards.
◎ Advanced lubrication system: low power, low energy consumption, small fuel consumption, low use cost.
◎ Water-cooled device improves the operating temperature of the bearing and increases the service life.
◎ Supported by a certain flexible bearing seat, the equipment has less vibration and more stable operation.
◎ Adopt 5V united belt automatic tensioning device, high transmission efficiency, stable and reliable operation, l...
The positive pressure filter is a filter placed in a closed pressurized warehouse. A scraper conveyor is arranged under the falling slot of the disc filter, and a discharge device is installed at the head. The filtered suspension is fed into the tank of the filter by the feed pump, and the pressurized chamber is filled with a certain pressure of compressed air. On the filter disc, a pressure difference is formed between the filter valve and the air-water separator through the atmosphere. Unde...
This device is made of motor, reduction gears, draught fan, drying tube and shell body.
Working principle
Steam heat drying tube at first, material get into shell body, drying tube rotated by motor, meanwhile, stir fry and push materials, the wet steam will be discharged to outdoor by draught fan.
Equipment characteristic
1. Advantages: low steam consumption, low electricity consumption, wide range of drying material, large output, large water evaporation, high moisture material which can d...
In the corn starch processing technology, after the light liquid (dilute protein) of the separator is pressed by a plate and frame filter press, the protein powder produced is large in size, about 50% water, and has a certain viscosity. Before entering the tube bundle dryer, it is necessary to perform the crushing. The traditional crusher is used for crushing, and the effect is not ideal. The new wet protein crusher independently developed by our company has completely solved this problem tha...
In the corn starch processing technology, after the light liquid (dilute protein) of the separator is pressed by a plate and frame filter press, the protein powder produced is large in size, about 50% water, and has a certain viscosity. Before entering the tube bundle dryer, it is necessary to perform the crushing. The traditional crusher is used for crushing, and the effect is not ideal. The new wet protein crusher independently developed by our company has completely solved this problem tha...
The multi effect falling film evaporator uses the falling film evaporation principle to heat and boil the dilute solution to vaporize part of the water to achieve the purpose of concentrating the solution. This unit adopts continuous production process, which has the advantages of large concentration ratio (1 / 5-1 / 10), wide viscosity range (<400CP), good heat transfer effect, large processing capacity, etc., suitable for heat sensitivity, high concentration, viscosity The evaporation of...